66506-118LF Quickie Header, 10-pos, 0.100", dual-row, 30µin Gold
Amphenol FCI Quickie 66506-118LF board-to-cable header, 10 positions, dual-row 0.100" (2.54mm) pitch, 4-wall shrouded body with keying slot, push-pull push-pull latch, male square-pin contacts in phosphor bronze, through-hole solder termination, gold or Gold GXT™ plating 30µin, UL94 V-0 glass-filled polyester insulation, 0.365" insulation height, all positions loaded, tray package.
Specifications
| Parameter | Value |
|---|---|
| Series | Quickie™ |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.365\" (9.27mm) |
| Insulation material | Polyester, Glass Filled |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
All specifications
| Parameter | Value |
|---|---|
| Features | Keying Slot |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 10 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact length - post | 0.105\" (2.67mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
Frequently asked questions
What is the 66506-118LF's listed style and series?
The listing shows Style Board to Cable/Wire and Series Quickie™ — it is a board-to-cable dual-row header, not a board-to-board or wire-to-board plug.
What contact plating does the 66506-118LF carry?
Gold or Gold GXT™ at 30.0µin (0.76µm) on the mating surface, applied over the phosphor bronze base — a mid-gold grade suited to moderate mating-cycle signal applications.
What connector does the 66506-118LF mate with?
The matching Quickie series IDC or crimp receptacle with corresponding keying slot and polarization feature — the 4-wall shroud and push-pull latch define the mechanical engagement. Confirm the receptacle's circuit count and current rating match your application before specifying.