Amphenol ICC (FCI) BERGSTIK® II, 67997-712HLF, unshrouded male pin header, 12 circuits, dual-row, 0.100" (2.54 mm) pitch, through-hole solder termination, 30 µinch gold on mating face, rated 3 A per contact.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~130°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.100\" (2.54mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Parameter | Value |
|---|---|
| Package | Bag |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 12 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.450\" (11.43mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
In a field-service board that gets swapped quarterly, the contact interface will outlast the product revision cycle.
Unshrouded means the square pins are exposed — no plastic shroud to guide the mating half. This gives the board designer maximum flexibility for wire-to-board or board-to-board stacking height, but the mating alignment depends entirely on the receptacle housing.
Yes, it is an unshrouded header — the square pins are exposed with no plastic shroud. The mating receptacle provides the alignment and keying.