The Amphenol 67998-106HLF is a 6-position, dual-row unshrouded header in the BergStik® II series. It uses a 0.100" (2.54 mm) pitch on both the pin-to-pin and row-to-row spacing, which matches the standard 0.100-inch grid layout common to prototyping and production boards. The through-hole solder tails give it mechanical retention that an SMT header lacks, making it a practical choice for a cable-mated board-to-board or wire-to-board connection where the header sees insertion and extraction forces.
The 0.100" pitch and row spacing define a straightforward footprint — two rows of 0.025-inch square pins on a 0.100-inch grid. The 0.107" (2.71 mm) post length below the insulator is short; it suits a standard 1.6 mm PCB but leaves limited tail protrusion for a thick board or a secondary solder-side component.
Position count and sourcing
At 6 positions, this is the smallest dual-row member in the 67998 base series. The 72-position 67997-172HLF shares the same 0.100" pitch, 30.0 µin gold plating, and unshrouded push-pull design, but carries a 3 A rating instead of 5 A.