The Amphenol BERGSTIK® II 67998-108HLF is an 8-position, dual-row, unshrouded male pin header on a standard 0.100" (2.54mm) pitch — a workhorse board-to-board interconnect for prototype builds, test fixtures, and production runs where a reliable, low-cost pin header is called for. The 30.0µin (0.76µm) gold plating on the mating surface gives it a solid cycle life for repeated mating and unmating in a lab or field-service environment, while the tin solder tails take the rework heat without issue.
The 0.100" pitch is the de facto standard for 0.025" square pin headers — your board footprint is a 2 x 4 grid of 0.040" plated-through holes on that spacing, and it mates with any standard 0.100" pitch IDC socket or female header housing. The 5A per-contact rating is conservative for a phosphor bronze pin of this cross-section; at 25°C ambient you can run signal-level current without derating, and the UL94 V-0 black housing keeps it safe inside any equipment enclosure that requires a flammability rating. The 0.318" (8.08mm) mating pin length gives enough wipe for a positive contact in standard box headers or IDC receptacles.
No official replacement or cross-reference is on record; the 8-position, 0.100" pitch, 30µin gold spec is the fit check against your BOM.