The Amphenol FCI 67998-110HLF is a 10-position, dual-row unshrouded header from the BergStik II series. It sits on a standard 0.100" (2.54mm) pitch with a matching 0.100" row spacing, making it a drop-in fit for any 0.100" grid board layout. All 10 positions are loaded — no empty slots to track. Rated 5 A per circuit at 110 V, it handles board-to-board signal interconnect and light power duty where the current per pin stays under that ceiling. The contact finish is gold or GXT at 30.0 µin thickness, which gives enough plating for repeated mating cycles in a clean indoor environment without the cost of heavier gold. The housing is black UL94 V-0 rated, so it passes the flame rating required for equipment inside an enclosure.
Within the BergStik II family, the 67998-110HLF is the 10-position dual-row variant. The same-series 67998-108HLF carries 8 positions in the same 2-row layout at the same 0.100" pitch — the choice comes down to whether your circuit count needs 8 or 10 positions. Both use the same contact system and footprint pattern, so a board laid out for one can often accommodate the other by populating or depopulating positions.
The through-hole solder termination with a 0.107" post length suits standard PCB thicknesses.