Key Ratings and Fit
The 30.0 µ" gold on the mating interface is the key differentiator from tin-plated siblings: it handles more mating cycles and resists fretting corrosion in low-voltage circuits where tin oxide can cause intermittent contact. The overall contact length of 0.525" (13.34mm) and a mating length of 0.318" (8.08mm) define the stack height when mated with a compatible receptacle.
This header mates with any standard 0.100" pitch, dual-row, unshrouded or shroud-receptacle socket strip that accepts 0.025" square pins — the BERGSTIK II receptacle housings (e.g., 67997 series) or generic equivalents from the same pitch family. The 14-position count and dual-row layout mean the mating half must be a 2x7 configuration. No keying or polarization is built into the header itself; the mating receptacle or the board layout provides orientation.