Skip to main content
Log in
67998-248HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 67998-248HLF, 48-pos 0.100" Header, 5A

MPN67998-248HLF
Active

Amphenol BERGSTIK® II 67998-248HLF, 48-position dual-row 0.100" (2.54mm) pitch unshrouded male header, through-hole mount, solder termination, 5A per circuit at 110V, gold or GXT contact plating 15µin (0.38µm), UL94 V-0.

$6.7800Ref. price · indicative, final on quote
67998-248HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

67998-248HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions48
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.107\" (2.71mm)
Overall contact length0.525\" (13.34mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

The Amphenol 67998-248HLF is a 48-position dual-row unshrouded male header from the BERGSTIK® II series, on the standard 0.100" (2.54 mm) pitch. Rated 5 A per circuit at 110 V, with gold or GXT™ contact plating at 15.0 µin (0.38 µm) on the mating surface — sized for repeated mating cycles in signal-level board-to-board duty.

The 0.100" (2.54 mm) pitch and 0.100" row spacing are the de facto standard for IDC ribbon cable and DIP IC footprints — any board laid out for a 0.100" dual-row header accepts this part without a layout change.

Frequently asked questions

Where can I buy 67998-248HLF and how do I get a price?

The 67998-248HLF is sourced to order against an RFQ through independent distribution. Submit an RFQ for current pricing and availability — both are confirmed at quote time.

What is the current rating of 67998-248HLF?

The 67998-248HLF is rated 5 A per circuit at 110 V. This is a per-contact rating at the stated voltage — derate above ambient if the board runs hot.

What is the pitch of 67998-248HLF?

The pitch is 0.100" (2.54 mm) on both the mating interface and the row spacing. This is the standard DIP/IDC footprint.

Is 67998-248HLF shrouded or unshrouded?

It is unshrouded — no plastic shroud around the pins. The mating receptacle must provide its own alignment and polarization.