The Amphenol ICC 67998-428HLF is a 28-position, dual-row unshrouded male pin header from the BERGSTIK® II series. At a 0.100" (2.54mm) pitch, it matches the standard DIP footprint. Rated at 5 A per contact with a 110 V voltage rating, this header handles signal and low-power distribution. The tin plating on both the mating and post surfaces keeps cost down, but limits the connector to a moderate number of mating cycles — it's built for a permanent or infrequently disconnected interconnect, not a daily field-service disconnect.
Board Fit and Layout
The 0.100" (2.54mm) pitch and 0.100" (2.54mm) row spacing define a standard 0.100" x 0.100" grid footprint. The overall contact length of 0.525" (13.34mm) breaks down as 0.318" (8.08mm) mating length and 0.107" (2.71mm) solder tail — a typical through-hole post length for a standard PCB thickness. The unshrouded design means the mating connector must be aligned by the board layout or a separate alignment feature.