Skip to main content
Log in
68000-414HLF — Amphenol product photo
Amphenol

68000-414HLF Amphenol ICC BERGSTIK II 14-Pin Header

MPN68000-414HLF
Active

Amphenol ICC (FCI) BERGSTIK® II, 14-position unshrouded male pin header, 0.100" (2.54mm) pitch, through-hole solder termination, tin-plated contacts, 3A per contact, UL94 V-0 black housing, -65°C~125°C.

$0.3935Ref. price · indicative, final on quote
68000-414HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68000-414HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A per Contact
Operating temperature-65°C~125°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions14
Contact finish - postTin
Contact length - post0.095\" (2.41mm)
Overall contact length0.425\" (10.80mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Why the 14-Pin Unshrouded Header Exists

The base product number is 68000, which covers the full BERGSTIK® II unshrouded header family. The -414HLF suffix specifies the 14-position, single-row, tin-plated, through-hole variant with a 0.095" post length.

What Crosses Into the Harness You Have

This is an unshrouded header — no plastic shroud around the pins. Phosphor bronze offers good spring properties for repeated insertion, but the tin plating means this header is not rated for frequent field reconnection — it is a one-time-mate or occasional-service part.

Frequently asked questions

Is the 68000-414HLF unshrouded?

Yes, the 68000-414HLF is an unshrouded header — there is no plastic shroud around the male pins. This makes it easier to probe or rework on the bench, but it provides no keying or polarization against mis-mating.

What is the closest pin-compatible alternative in the BERGSTIK II series?

Within the same BERGSTIK® II series, the 68000-414HLF is a 14-position, single-row, unshrouded, through-hole header with tin plating and a 0.095" post. A pin-compatible alternative would be a gold-plated variant (e.g., 68000-414HL) if higher mating-cycle life is needed, or a different post length (e.g., 0.120" or 0.230") depending on board thickness. Confirm the specific suffix against your BOM.