Skip to main content
Log in
68000-418HLF — Amphenol product photo
Amphenol

68000-418HLF Amphenol ICC BERGSTIK II Header 18 Position

MPN68000-418HLF
Active

Amphenol ICC (FCI) BERGSTIK® II unshrouded header, 18 positions, single row, 0.100" (2.54 mm) pitch, through-hole solder termination, tin-plated male pins rated 3 A per contact.

$0.7600Ref. price · indicative, final on quote
68000-418HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68000-418HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A per Contact
Operating temperature-65°C~125°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions18
Contact finish - postTin
Contact length - post0.095\" (2.41mm)
Overall contact length0.425\" (10.80mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Board Layout Fit: 18 Positions at 0.100" Pitch

The 68000-418HLF: The 0.425" (10.80 mm) overall contact length breaks down as 0.230" (5.84 mm) mating pin and 0.095" (2.41 mm) solder tail, which sets the board thickness and through-hole depth budget.

Current and Contact Finish: Tin-Plated for Moderate-Duty Signal Paths

The solder tails are also tin-plated, matching the common HASL or immersion tin board finish for a reliable solder joint.

Mating and Mounting: Unshrouded Push-Pull Interface

Through-hole solder termination gives the header good shear strength against cable strain during mating and unmating.

Frequently asked questions

What is the difference between 68000-418HLF and 68000-418HL?

The 68000-418HLF is RoHS compliant (lead-free), while the 68000-418HL is the non-RoHS version. Both share the same 18-position, 0.100" pitch, tin-plated design.

Is 68000-418HLF RoHS compliant?

Yes, the 68000-418HLF is RoHS compliant per the manufacturer's listing.

What is the mating connector for 68000-418HLF?

The header has no keying, so the receptacle must provide its own alignment.