Skip to main content
Log in
68002-127HLF — Amphenol product photo
Amphenol

68002-127HLF Amphenol ICC BERGSTIK II Header, 27 Pos 2.54mm

MPN68002-127HLF
Active

Amphenol ICC (FCI) BERGSTIK® II header, order code 68002-127HLF, 27 positions, single row, 0.100" (2.54 mm) pitch, 3 A, gold-plated square pins, through-hole, solder termination.

$1.5319Ref. price · indicative, final on quote
68002-127HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68002-127HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions27
Contact length - post0.150\" (3.81mm)
Overall contact length0.480\" (12.19mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

BERGSTIK II unshrouded header, 27 positions

The 68002-127HLF is the 27-position member of Amphenol ICC's BERGSTIK® II unshrouded header line, a single-row board-to-board interconnect. It carries gold-plated square pins rated 3 A per contact at 0.100" (2.54 mm) pitch, with a 30.0 µin (0.76 µm) gold mating finish, and terminates through-hole with solder.

Pin length and board fit

The overall contact length is 0.480" (12.19 mm), split into a 0.230" (5.84 mm) mating pin and a 0.150" (3.81 mm) solder tail — the tail length determines the PCB thickness the header can accommodate. The 0.100" (2.54 mm) insulation height matches the standard BERGSTIK II profile, keeping the mated stack height consistent with other series members.