Skip to main content
Log in
68002-406HLF — Amphenol product photo
Amphenol

68002-406HLF Amphenol ICC BERGSTIK II Header, 6 Pos

MPN68002-406HLF
Active

Amphenol ICC (FCI) BERGSTIK® II unshrouded header, 6 circuits, single row, 0.100" (2.54 mm) pitch, through-hole solder termination, tin-plated male pins, rated 3 A, UL94 V-0 black housing.

$0.3500Ref. price · indicative, final on quote
68002-406HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68002-406HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions6
Contact finish - postTin
Contact length - post0.150\" (3.81mm)
Overall contact length0.480\" (12.19mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

6 Circuits on a 0.100-Inch Grid — No Layout Surprises

The 68002-406HLF: The unshrouded body means the mating receptacle sits flush against the header face; there is no shroud wall to eat into the board edge clearance. The tin finish is cost-effective for applications that see fewer than 50 mating cycles; if the board gets reconnected quarterly in a field-service unit, the tin contact surface will wear through to the phosphor bronze base after a few years.

The push-pull fastening means the mating connector is held by friction alone — no latch, no lock.

Temperature and Flame Rating for Industrial Cabinets

Frequently asked questions

What is the exact pinout of the 68002-406HLF?

It is a single-row, 6-position header with all positions loaded. Pin 1 is typically indicated by a square pad on the PCB footprint or a chamfer on the header body. The pinout follows standard 0.100" spacing: positions 1 through 6 in a line.

What is the mating connector for the 68002-406HLF?

Any standard 0.100" pitch, 6-position, single-row crimp receptacle housing or IDC socket that mates with an unshrouded male pin header. The push-pull fastening means the mating half relies on friction retention — no latch or lock.

Is the 68002-406HLF RoHS compliant?

Yes, it is listed as RoHS Compliant.