Board-to-Board Header, 11 Circuits, 0.100" Pitch
The Amphenol 68004-111HLF is the 11-position, single-row member of the BERGSTIK® II series — a basic unshrouded male pin header for board-to-board interconnect. Rated 5 A per circuit at 110 V, with gold or GXT™ plating at 30.0 µ" (0.76 µm) minimum on the mating surface. The black UL94 V-0 housing and through-hole solder termination make this a straightforward fit for a standard PCB where no shrouding or locking is needed.
The 0.100" pitch is the same as the classic 0.1" grid — any board laid out for a standard DIP or header pattern accepts this footprint without a layout change. 5 A per circuit is typical for signal-level duty; at 110 V the creepage distance on an unshrouded header is adequate for low-voltage logic and general-purpose I/O, but not for mains or high-side switching.