The Amphenol/FCI BERGSTIK® II 68004-230HLF is a 30-position, single-row unshrouded header on the standard 0.100" (2.54mm) pitch — the same grid as legacy DIP footprints. It mates with matching BERGSTIK II receptacle strips or any 0.100" pitch female socket strip, making it a straightforward board-to-board interconnect for parallel-stacked PCBs or a wire-to-board transition when paired with a crimp housing. The through-hole solder termination and black UL94 V-0 rated insulator suit it for general-purpose PCB assembly where the unshrouded design allows access for probing or manual rework.
The 30 positions of the 68004-230HLF sit at the higher end of the single-row BERGSTIK II range — the same 0.100" pitch and 5A per-contact rating carry across the series, so the selection decision is purely the position count matching the BOM line. The unshrouded profile keeps the overall height low at 0.525" (13.34mm) total contact length, with a mating section of 0.318" (8.08mm) and a solder post of 0.107" (2.71mm) — the post length is short enough for standard 1.6mm PCBs without bottom-side interference.