Amphenol ICC (FCI) BERGSTIK® II, 68015-113HLF, 13-position single-row unshrouded header, 0.100" (2.54 mm) pitch, right-angle through-hole, 3 A per contact, 30 µinch gold mating finish, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A per Contact |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.095\" (2.41mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Package | Bag |
| Parameter | Value |
|---|---|
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 13 |
| Contact length - post | 0.090\" (2.29mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 68015-113HLF: The odd count means it is not a standard byte-width bus — likely a custom harness or a sensor array where every circuit is used, since all positions are loaded.
At one mate-unmate cycle per quarter, the contact interface is rated for over 500 cycles — well over a century of service life in a panel that is accessed for maintenance.
The square pin shape provides good solder fillet formation on the barrel.
Buyers need immediate sourcing options to complete BOM or repair quickly.
Design engineers must verify mechanical and electrical specs for fit and compliance.
Regulatory compliance is mandatory for many end products; absence can block procurement.
Sourcing buyers negotiate volume pricing to control costs.
Brokers and buyers need alternatives for lifecycle or stock-out situations.
Lifecycle status determines whether the part can be used in new designs or requires last-time buy.