Board Fit and Contact Rating
The 68015-415HLF: Rated 3 A per contact. This is a signal-level header — not suited for power distribution above a few amps per circuit. The mating half is a standard 0.100" pitch receptacle (IDC or crimp socket); no polarization keying is provided, so orientation depends on the housing or connector alignment.
Termination and Housing Details
The contact finish on the post is tin, compatible with standard wave or hand-solder processes. Contact mating length is 0.230" (5.84mm) — sufficient for a positive wipe with most standard 0.100" pitch receptacles. The square pin profile (0.025" square typical for BergStik) provides reliable contact beam deflection.