Skip to main content
Log in
68015-417HLF — Amphenol product photo
Amphenol

68015-417HLF Amphenol ICC BERGSTIK II Header, 17 Pos, 2.54mm

MPN68015-417HLF
Active

Amphenol ICC (FCI) BERGSTIK® II unshrouded header, 17 positions, 0.100" (2.54mm) pitch, through-hole right-angle, tin-plated square pins, UL94 V-0 black housing, 3A per contact.

$0.6200Ref. price · indicative, final on quote
68015-417HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68015-417HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating3A per Contact
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.095\" (2.41mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions17
Contact finish - postTin
Contact length - post0.090\" (2.29mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The 68015-417HLF: The right-angle body sits at 0.095" (2.41mm) insulation height above the board, leaving clearance for components underneath on the opposite side.

RoHS compliant per current directive.

Peer Position-Count Alternatives

If your BOM calls for fewer circuits, the same BERGSTIK® II right-angle unshrouded footprint is available in 12 positions (68015-412HLF), 6 positions (68015-406HLF), and 4 positions (68015-404HLF). All share the 0.100" pitch, tin plating, 3 A rating, and UL94 V-0 housing — the only difference is the pin count. No board layout change is needed beyond the number of plated holes.

Frequently asked questions

Is 68015-417HLF a shrouded or unshrouded header?

Unshrouded. The pins are exposed with no plastic shroud, so the mating receptacle must align by PCB layout or harness routing — no keying or mis-mate protection is built in.