Skip to main content
Log in
68016-215HLF — Amphenol product photo
Amphenol

68016-215HLF Amphenol ICC (FCI) BergStik II Header, 15 Pos

MPN68016-215HLF
Active

Amphenol ICC (FCI) BergStik® II header, order code 68016-215HLF, 15 positions, single row, 0.100" (2.54 mm) pitch, 3 A, unshrouded male pins, through-hole right-angle, solder termination, gold or Gold, GXT™ mating finish.

$2.2900Ref. price · indicative, final on quote
68016-215HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68016-215HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.095\" (2.41mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions15
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Board-to-board unshrouded header, 15 positions, right-angle tails

The 68016-215HLF is the 15-position member of the BergStik® II unshrouded header line from Amphenol ICC (FCI). It carries gold or Gold, GXT™ plated square pins at 0.100" (2.54 mm) pitch, rated 3 A, and terminates via through-hole right-angle solder tails for board-edge or parallel-to-PCB routing.

Through-hole right-angle fit for single-row board layouts

The 0.100" pitch and single-row 15-position layout match standard 0.100" grid prototyping and production boards. Unshrouded pins allow push-pull mating with any BergStik II or compatible receptacle. Right-angle orientation places the mated pin length at 0.230" (5.84 mm) above the board; the solder post extends 0.120" (3.05 mm) below the insulator for through-hole wave soldering.