Skip to main content
Log in
68020-140HLF — Amphenol product photo
Amphenol

68020-140HLF BERGSTIK II Header 40-Pos Right Angle 2.54mm

MPN68020-140HLF
Active

Amphenol ICC (FCI) BERGSTIK® II, 68020-140HLF, unshrouded header, 40 positions, 2 rows, 0.100" (2.54mm) pitch, through-hole right-angle, 3A per contact, 30µin gold mating finish, UL94 V-0.

$3.4600Ref. price · indicative, final on quote
68020-140HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68020-140HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating3A per Contact
Operating temperature-65°C~125°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions40
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.095\" (2.41mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

40-Position Dual-Row Right-Angle Header

The 68020-140HLF: The through-hole solder tails (0.095" post length) anchor the header to the PCB and handle the mechanical strain from cable pull.

How It Compares to Lower-Position Siblings

The 10-position 68021-210HLF uses 15 µinch gold instead of 30 µinch — a meaningful difference if the application cycles the connector more than a few dozen times over its life. For a low-cycle, cost-sensitive build, the 15 µinch variant may be adequate; for field-service or corrosive environments, the 30 µinch on the 68020-140HLF is the safer call.

Frequently asked questions

Where can I buy 68020-140HLF and how do I get a price?

Submit an RFQ with your target quantity and we will confirm current pricing and lead time — no stock-holding claim, no firm price on the page.

What is the pitch and number of rows for 68020-140HLF?

0.100" (2.54mm) pitch, dual rows with 0.100" row spacing — 40 positions total, all loaded.

Is 68020-140HLF shrouded or unshrouded?

No shroud to protect the pins from bending during handling.

What is the mounting type and termination of 68020-140HLF?

Through-hole, right-angle mounting with solder termination. The pins exit the bottom of the housing and bend 90 degrees to lie parallel to the PCB.