The Amphenol FCI 68022-110HLF is a 10-position, dual-row unshrouded header from the BERGSTIK® II series. It uses the standard 0.100" (2.54mm) pitch for both the mating interface and row spacing, making it a drop-in fit for legacy 0.100" footprint patterns. The right-angle through-hole termination routes the pins parallel to the board, which suits edge-mount or mezzanine-style connections where the cable exits along the PCB plane. Rated at 5 A per circuit at 110 V, this is a signal-level interconnect — the current is enough for logic-level power or I/O lines, but not a bus bar replacement. The contact finish is gold or Gold GXT™ at 30.0µin (0.76µm) on the mating surface, a plating grade that handles repeated mating cycles and resists corrosion in industrial or telecom environments. The phosphor bronze base material provides spring retention through the life of the connection. The unshrouded design means there is no polarization key — the header relies on the mating receptacle's housing alignment for correct orientation. The push-pull fastening type means no locking latch; the retention comes from the contact normal force alone. The UL94 V-0 black PA housing suits equipment inside an enclosure that requires a flame rating.
Sourcing and Lifecycle
The 68022-110HLF carries an Active lifecycle status from Amphenol FCI — no end-of-life notice, no last-time-buy window. There is no official successor or cross-reference on record.