BERGSTIK II 68022-112HLF — 12-Position Right-Angle Header
The Amphenol FCI 68022-112HLF is a 12-position, 2-row male pin header from the BERGSTIK II series, on a standard 0.100 inch (2.54 mm) pitch. It is an unshrouded, right-angle through-hole mount header with push-pull fastening, designed for board-to-board interconnect applications where a low-profile, right-angle connection is needed at the PCB edge.
Key Specs and What They Mean for the Build
The 0.100 inch (2.54 mm) pitch and row spacing are the industry-standard grid for this class of board-to-board header, meaning the footprint matches a wide range of legacy and current designs. The 30.0 µin gold mating finish on the phosphor bronze contacts provides a robust surface for repeated mating cycles in controlled environments — this is not a tin-plated signal header for one-and-done assembly; the gold layer handles field service and test points without fretting corrosion. Rated 5 A per circuit at 110 V, each square pin carries enough current for moderate power distribution on a signal bus or low-current I/O bank. The unshrouded design means the pins are exposed — the mating receptacle needs to provide the polarization and keying. Right-angle orientation places the pin row parallel to the board surface, which suits mezzanine or perpendicular board stacking where the connector sits at the board edge.
Obsolete Status and Sourcing Reality
The 68022-112HLF is marked Obsolete by the manufacturer. There is no official successor order code on record for this exact 12-position, right-angle variant. No stock-holding claim; each lot is verified for authenticity and condition before it ships.