It runs on the standard 0.100" (2.54 mm) pitch and row spacing, so it drops onto a legacy DIP footprint without a board respin. All 34 positions are loaded — no unpopulated pins to track on the BOM. The 30.0 µ" (0.76 µm) gold or GXT™ plating on the mating surface supports repeated mating cycles and resists corrosion in field-service or moderate industrial environments. The phosphor bronze contact spring maintains normal force over temperature.
The housing carries a UL 94 V-0 flammability rating.
This unshrouded header mates with any standard 0.100" pitch IDC or crimp receptacle that accepts a 34-position, dual-row pin strip — no proprietary keying or latch geometry to match. The 0.318" (8.08 mm) mating pin length provides enough engagement depth for most standard receptacles. The 0.110" (2.79 mm) solder post length suits standard PCB thickness; verify the board stack-up if using a thick backplane.