FCI BergStik® II, 56-position dual-row unshrouded header, 0.100" (2.54 mm) pitch, right-angle through-hole, 30.0 µ" gold-plated square pins, rated 5 A, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 110V |
| Current rating | 5A |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.240\" (6.10mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Parameter | Value |
|---|---|
| Package | Bag |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 56 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The mating interface carries 30.0 µ" (0.76 µm) gold over phosphor bronze, rated for 5 A per contact at the listed voltage of 110 V.
The right-angle termination means the solder posts extend 0.110" (2.79 mm) below the board surface after through-hole soldering. The mating pin length is 0.318" (8.08 mm), and the insulator sits 0.240" (6.10 mm) above the board.
Yes — it is a right-angle through-hole header. The pins exit parallel to the PCB, with a post length of 0.110" (2.79 mm) below the board.
The mating pitch is 0.100" (2.54 mm), with the same 0.100" row spacing — standard for BergStik II and compatible with most 0.100" pitch IDC connectors.