BERGSTIK II 2-Position Unshrouded Header
The FCI 68022-202HLF is a 2-position, dual-row unshrouded header from the BERGSTIK® II series. It uses a standard 0.100" (2.54mm) pitch on both the pin-to-pin and row spacing, making it a drop-in fit for any 0.100" grid board layout. The right-angle through-hole orientation places the pins parallel to the board, suited for edge-mount or low-profile interconnect where a straight header won't fit. Rated 5 A per contact with a 110 V voltage rating, this header handles signal-level currents and low-voltage power distribution. The mating contacts are plated with 15.0 µin (0.38 µm) gold or Gold, GXT™, giving it a solid mating cycle life for field-service or repeated connect/disconnect duty.
What the Ratings Mean for Fit
The 0.100" pitch and 2-position count are the first check against your board footprint — this header occupies two holes on a standard 0.100" grid, with a row spacing of 0.100" between the two rows. The 5 A per-contact rating is typical for a signal-level header; the limiting factor is the temperature rise in the housing at full load, not the contact itself. The 15.0 µin gold plating on the mating surface is an industrial-grade thickness — it handles repeated mating cycles without the fretting corrosion you'd see with tin on a frequently disconnected line. The UL94 V-0 rating on the black insulation means the housing meets the flame retardancy standard for equipment inside an enclosure.