The FCI BERGSTIK® II 68022-214HLF is a 14-position, dual-row unshrouded male pin header on 0.100" (2.54 mm) pitch — the standard DIP footprint that matches legacy perfboard patterns and 0.100" IC layouts. All 14 positions are loaded; no partial stuffing to track. Rated 5 A per contact at 110 V, with the current limit set by the pin density and ambient temperature rise through the UL94 V-0 black thermoplastic housing. The mating contact finish is 15.0 µin (0.38 µm) gold or Gold, GXT™ over phosphor bronze — the gold layer supports repeated mating cycles without fretting corrosion, which matters for test fixtures or field-service reconnections. The 0.318" (8.08 mm) mating pin length provides adequate wipe for standard box headers and IDC receptacles.
This is an unshrouded header with push-pull fastening — mates with any standard 0.100" pitch dual-row receptacle or IDC socket that accepts 0.025" square pins. The 0.110" (2.79 mm) solder post length suits standard 1.6 mm thick PCBs; the right-angle tails sit flush against the board for wave solder. No board locks or retention features — the through-hole solder fillets carry the mechanical load.