The Amphenol 68022-226HLF is a 26-position, dual-row BergStik® II unshrouded header with a 0.100" (2.54 mm) pitch. It uses square male pins with a gold or Gold GXT™ mating finish, rated for 5 A per contact at 110 V. The right-angle through-hole termination places the pins parallel to the board, making it a straightforward choice for board-to-board stacking or mezzanine connections where the mating receptacle sits on a parallel PCB.
What the specs mean for the fit
The 0.100" pitch matches the standard BergStik footprint, so the board layout is the same as any other BergStik II header — no surprises. All 26 positions are loaded, so the BOM circuit count must match exactly. The 5 A per-contact rating is typical for signal-level interconnects; the unshrouded design means there's no polarization key, so the mating receptacle must be aligned by the board layout or a separate alignment feature. The 15.0 µ" gold plating on the mating surface supports repeated connect/disconnect cycles — useful if this header sees field service or test jig use.
Sourcing and lifecycle
The 68022-226HLF carries an Active lifecycle status per the manufacturer — full production, no end-of-life notice. No official successor or cross-reference is on record.