Skip to main content
Log in
68022-252HLF — Amphenol product photo
Amphenol

Amphenol FCI 68022-252HLF BergStik II Header, 52 Pos

MPN68022-252HLF
Active

Amphenol FCI BergStik II, 68022-252HLF, unshrouded 2-row header, 52 positions, 0.100" (2.54 mm) pitch, right-angle through-hole, gold-plated phosphor bronze contacts, 5 A, 110 V, UL94 V-0.

$7.4154Ref. price · indicative, final on quote
68022-252HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68022-252HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.240\" (6.10mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Number of rows2
Pitch - mating0.100\" (2.54mm)
Positions52
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.110\" (2.79mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.318\" (8.08mm)
Number of positions loadedAll
Contact finish thickness - mating15.0µin (0.38µm)

Product details

The Amphenol FCI 68022-252HLF is a 52-position unshrouded header from the BergStik II series, built on the standard 0.100" (2.54 mm) pitch in a dual-row layout.

At 52 positions fully loaded, this header matches a 52-circuit BOM line exactly — no unloaded positions to account for. The 0.100" row spacing mirrors the pitch, so the footprint is a straightforward 0.100" x 0.100" grid that takes standard BergStik receptacle housings. Right-angle orientation means the connector body sits flush against the board edge; the 0.110" (2.79 mm) solder post length is sized for standard 0.062" PCBs with through-hole soldering.

Termination is solder-only: the right-angle pins go through plated through-holes and are wave-soldered. No press-fit option on this variant; the 0.110" post length is a standard through-hole dimension.

Frequently asked questions

Where can I buy the 68022-252HLF available via RFQ confirmation?

Contact the storefront with your BOM quantity for a same-day quote.

Is the 68022-252HLF obsolete or active?

The 68022-252HLF carries an Active lifecycle status per Amphenol FCI — full production, no end-of-life notice or last-time-buy window.

What is the pitch of the 68022-252HLF?

The 68022-252HLF uses a 0.100" (2.54 mm) pitch on both the pin spacing and row spacing, matching the standard BergStik II grid.

What is the mating connector for the 68022-252HLF?

This unshrouded header mates with any standard BergStik II receptacle housing or IDC socket that matches the 0.100" pitch and 52-position dual-row layout — no keying or shroud, so the mating half is defined by the board footprint and position count.