BERGSTIK II 66-Position Unshrouded Header
The FCI 68022-266HLF is a 66-position, dual-row unshrouded header from the BERGSTIK® II series, designed for board-to-board interconnect on a standard 0.100" (2.54mm) pitch. This is a through-hole, right-angle male pin header with all positions loaded, intended for parallel PCB mating where the connector exits at the board edge. Each phosphor bronze contact carries a 5A current rating with a gold or GXT™ mating finish at 15.0µin (0.38µm) thickness — sufficient for signal-level and moderate I/O duty in controlled environments.
The 0.100" pitch and 0.100" row spacing define a 0.100" x 0.100" grid for the through-hole footprint — standard for DIP-style layouts. The mating pin length of 0.318" (8.08mm) and post length of 0.110" (2.79mm) set the board-to-board stack height and the solder tail protrusion below the PCB.
This is a standard BERGSTIK II catalog part, so the BOM line can be committed without near-term obsolescence risk.