Skip to main content
68023-227HLF — Amphenol product photo

Amphenol BERGSTIK II 68023-227HLF

MPN68023-227HLF
Active

Amphenol BERGSTIK II, 27-circuit single-row right-angle header, 0.100" (2.54 mm) pitch, through-hole solder termination, male pin, unshrouded, rated 5 A per circuit, gold mating finish 15.0 µin (0.38 µm), UL94 V-0 black housing.

$2.2197Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

68023-227HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.095\" (2.41mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions27
Contact length - post0.305\" (7.75mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.136\" (3.45mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

The Amphenol BERGSTIK II 68023-227HLF is a 27-circuit single-row unshrouded header on a 0.100" (2.54 mm) pitch, terminated through-hole at a right angle. It carries 5 A per circuit with a gold or GXT mating finish rated at 15.0 µin (0.38 µm) — the plating grade supports repeated mating cycles in a board-to-board interconnect. The UL94 V-0 black housing and phosphor bronze contacts suit it for general-purpose PCB stacking where the board-edge orientation and 27-way count match the BOM line.

Against the 68023-228HLF, the difference is position count: 27 circuits here versus 28 on the sibling at the same 0.100" pitch and single-row layout. The extra position adds 0.100" to the body length — a board footprint decision, not a rating change. Against the 68023-226HLF, the delta is one fewer position (26 vs 27). The pitch, current rating, and plating are identical across the three; the choice is purely the circuit count matching the target harness or PCB.

Frequently asked questions

What is the pin pitch of 68023-227HLF?

The pin pitch is 0.100" (2.54 mm), standard for the BERGSTIK II series.