The Amphenol FCI 68023-229HLF is a 29-position, single-row unshrouded male header from the BERGSTIK® II series, on the standard 0.100" (2.54 mm) pitch. Each square pin is rated 5 A at 110 V, with the contact finish listed as gold or GXT™ at 15.0 µ" (0.38 µm) on the mating surface — a standard signal-grade plating that handles routine mating cycles without fretting.
The right-angle body means the pins exit the board edge, not straight up; check your enclosure clearance and mating axis before committing. With 29 positions, this is an odd count — most common headers are 10, 20, 30, or 40 pins — so confirm your BOM calls for exactly 29 circuits, not a 30-position that you depopulate. The 5 A per pin at 110 V is a per-contact maximum at room temperature; in a dense harness or elevated ambient, derate per the manufacturer's curve. The gold or GXT plating at 15.0 µ" is fine for repeated mating — it resists oxidation better than tin — but this is not a high-cycle connector (no cycle-life spec is given). For a one-time board-to-board join or occasional service, it holds up well.