It uses the standard 0.100" (2.54 mm) pitch and terminates via through-hole solder tails, making it a direct fit for a 0.100" grid PCB layout. The contacts are phosphor bronze with a 30.0 µin gold or Gold, GXT™ finish on the mating surface, rated for 5 A per contact at 110 V. The black UL94 V-0 rated housing is unshrouded, so the pins are exposed for mating with a standard 0.100" pitch female socket.
The 0.100" pitch is the classic PC-board grid — your footprint is a row of 15 plated through-holes on 0.100" centers, with the mating pin length of 0.318" (8.08 mm) reaching through the socket body. The 5 A per contact rating is typical for signal-level BergStik headers; the 30.0 µin gold on the mating side supports repeated mating cycles without contact fretting, so it holds up in a board that gets reworked or a cable that gets disconnected a few dozen times.