The Amphenol FCI 68031-132HLF is a 32-circuit single-row header from the BERGSTIK® II series, on the standard 0.100" (2.54 mm) pitch. The 30.0 µ" (0.76 µm) gold or Gold GXT™ plating on the mating surface gives it a solid cycle life for repeated connect/disconnect, while the phosphor bronze contacts are rated 5 A per circuit at 110 V. With a UL94 V-0 insulation rating and black housing, this is a general-purpose board-to-board interconnect for signal-level I/O — think legacy ribbon cable interfaces, test fixtures, or internal harnesses where the 0.100" pitch footprint is already on the board.
This header mates with any standard 0.100" (2.54 mm) pitch IDC socket or crimp receptacle that accepts a 0.025" (0.64 mm) square pin. Common mating halves include the Amphenol FCI DUBOX or BergStik receptacle housings, or any industry-standard 0.100" pitch female socket strip. Termination is through-hole solder — the 0.183" (4.65 mm) post length fits standard 1.6 mm (0.062") PCBs with room for a wave solder fillet. No press-fit, no SMT; this is a straightforward hand-solder or wave-solder part.
No official cross-reference or manufacturer-recommended replacement is on record; this is the current production part for the BOM line.