The Molex 68405-110 is a 10-position, 2-row unshrouded male header from the BERGSTIK® II series, on the standard 0.100" (2.54 mm) pitch that matches legacy and current board layouts. Mounted right-angle through-hole, it sits flat against the PCB edge for parallel board-to-board or wire-to-board connections where the mating receptacle slides on from the side. Rated 5 A per circuit at 110 V, with 30.0 µ" (0.76 µm) gold or GXT™ plating on the mating surface over phosphor bronze contacts.
As an unshrouded header, the 68405-110 mates with any standard 0.100" pitch 2-row female receptacle housing that accepts 0.025" square pins — the BERGSTIK II receptacle housings (e.g., 68786 series) or generic IDC sockets are direct fits. Right-angle orientation means the pins exit parallel to the board. The 0.095" (2.41 mm) post length suits standard 1.6 mm PCBs — the solder tail protrudes just enough for a reliable through-hole joint without bottoming out against the board. Row spacing is also 0.100" (2.54 mm), so the full 10-pin footprint occupies a 5 x 2 grid at the board edge — a compact layout that leaves room for adjacent components or routing channels.
If you need a pin-compatible alternative within the same BERGSTIK II family, compare the position count and plating grade.