Skip to main content
Log in
68405-114HLF — Amphenol product photo
Amphenol

Amphenol FCI 68405-114HLF BERGSTIK II Header, 14 pos

MPN68405-114HLF
Active

Amphenol FCI BERGSTIK® II header, 68405-114HLF, 14 positions, 2 rows, 0.100" (2.54 mm) pitch, 5 A, right-angle through-hole, gold-plated phosphor bronze contacts, unshrouded, UL94 V-0, bulk.

$0.8381Ref. price · indicative, final on quote
68405-114HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68405-114HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions14
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.095\" (2.41mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol FCI 68405-114HLF is a 14-position, dual-row BERGSTIK® II header on a 0.100" (2.54 mm) pitch — a standard footprint that matches a wide range of IDC sockets and shrouded headers. It is a board-to-board interconnect, unshrouded, with male square pins.

Within the BERGSTIK® II family, this 14-position header shares the 0.100" pitch and 5 A rating with other position counts. The position count is the decision-relevant difference — the footprint, current capacity, and gold plating thickness are identical across the series. If the BOM calls for 14 circuits, this is the direct fit.

Frequently asked questions

What current can this header carry?

5 A per contact at the listed voltage, with gold-plated phosphor bronze contacts at 30.0 µin (0.76 µm) on the mating face — a plating grade suited to repeated mating cycles rather than single-fit power routing.

What mounting orientation and termination does this header use?

Right-angle through-hole with push-pull fastening — the posts are square-profile, 0.095 inch (2.41 mm) below the board, accepting standard wave or hand-solder assembly on a 0.100-inch grid footprint.