Skip to main content
Log in
68405-426HLF — Amphenol product photo
Amphenol

Amphenol FCI 68405-426HLF BERGSTIK II Header, 26 Pos

MPN68405-426HLF
Obsolete

Amphenol FCI BERGSTIK® II, 26 Position, 0.100" (2.54mm) Pitch, 2 Row, 5 A, 110 V, Through Hole, Right Angle, Unshrouded Header.

$4.1400Ref. price · indicative, final on quote
68405-426HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68405-426HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions26
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.095\" (2.41mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Board-to-Board Header for Legacy Mezzanine Layouts

Tin-plated phosphor bronze contacts carry a 5 A per-circuit rating at 110 V — adequate for signal-level I/O, low-power logic, and control interfaces, but not intended for bus-level power distribution.

As an unshrouded header with push-pull fastening, this part mates with standard BergStik receptacle housings and IDC sockets that accept 0.025" square posts on 0.100" centers. The 0.095" (2.41 mm) solder tail length suits standard 0.062" to 0.093" PCB thicknesses for through-hole soldering.

Frequently asked questions

What is the pitch and mounting of 68405-426HLF?

The pitch is 0.100" (2.54 mm) on both the mating interface and row spacing. Mounting is through-hole, right-angle — the pins exit parallel to the board surface.