The Amphenol BERGSTIK® II 68422-410HLF is a 10-position, single-row, unshrouded male pin header on a 0.100" (2.54mm) pitch. It's a through-hole board-to-board interconnect with push-pull fastening — no latch, no shroud, just the pins. The tin-plated mating surface (100.0µin thickness) and tin-plated posts keep it cost-effective for internal harnesses where repeated mating cycles aren't the primary concern.
Common mates are the BERGSTIK® II female socket strip or a crimp-to-wire receptacle housing. For a build-to-print assembly, order the header, the mating housing, and the terminals separately.
The 0.100" pitch and single-row layout fit a standard 0.100" x 0.100" grid. Overall contact length is 0.631" (16.03mm), with a mating length of 0.318" (8.08mm) and a post length of 0.213" (5.40mm). The through-hole solder tails need a 0.028" to 0.032" drilled hole per pin — standard for this pitch class.
The 68001-410HLF is the same 10-position, single-row, unshrouded BERGSTIK® II header with identical pitch, plating, and UL94 V-0 rating. If your BOM calls for 5 A per pin, the 68422-410HLF is the correct match — the 68001-410HLF would be under-rated for that duty.