Rated 5 A per contact at 110 V, with 30.0 µ" (0.76 µm) gold plating on the mating surface — that plating thickness is the key spec for repeated mating cycles, well above the typical 15 µ" threshold for field-service or frequent disconnect applications.
35 positions loaded all the way across a single row means the header spans roughly 3.5 inches of board edge. For comparison, a 10-position sibling (68461-103HLF) covers about 1.0 inch, so the board keep-out zone scales linearly with position count. The right-angle orientation places the 0.400" (10.16 mm) mating pin and the 0.320" (8.13 mm) solder post on perpendicular axes, which sets the z-height budget for the enclosure wall clearance.
This header mates with any standard 0.100" pitch BergStik II or compatible receptacle housing that accepts 35 positions in a single row — typically a female socket strip with 0.025" square pin receptacles. Termination is through-hole solder; the 0.320" (8.13 mm) post length suits standard PCB thicknesses (0.062" to 0.093").