Skip to main content
Log in
68498-115H — Amphenol product photo
Amphenol

Molex 68498-115H BERGSTIK II Header, 15-Pin, 0.100" Pitch

MPN68498-115H
Active

Molex BERGSTIK® II 68498-115H, unshrouded header, 15 positions, single row, 0.100" (2.54 mm) pitch, right-angle through-hole, male pin, 5 A, 110 V, 30 µ" gold plating, UL94 V-0.

$0.7414Ref. price · indicative, final on quote
68498-115H datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

68498-115H Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.095\" (2.41mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions15
Contact length - post0.220\" (5.58mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Molex 68498-115H is a 15-position, single-row unshrouded header from the BERGSTIK® II series, built on the standard 0.100" (2.54 mm) pitch. It terminates through-hole, right-angle to the board, with male square pins.

The 0.100" pitch matches the legacy DIP IC footprint — a drop-in for 0.1-inch grid perfboard or standard through-hole layouts. Single-row means the board footprint is narrow, with the 15 pins in a straight line. Unshrouded, so the pins are exposed — no polarization keying; the mating connector relies on manual alignment.

Current and voltage rating

The 30 µ" gold plating keeps contact resistance stable over repeated mates, which matters more for signal integrity than for raw current capacity. For power duty above 5 A per pin, a heavier-gauge contact or wider pitch would be needed.

Frequently asked questions

What is the mating connector for the 68498-115H?

As an unshrouded header, it mates with any standard 0.100" pitch, 15-position single-row female socket or IDC receptacle that fits the 0.025" square pins. The specific mating half depends on the application — crimp housing, IDC ribbon, or board-mount socket.