Amphenol BERGSTIK® II unshrouded header, 68498-436HLF, 36 positions, single row, 0.100" (2.54mm) pitch, right-angle through-hole, tin-plated contacts, 5A.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 110V |
| Current rating | 5A |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.095\" (2.41mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 36 |
| Contact finish - post | Tin |
| Contact length - post | 0.220\" (5.58mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
Right-angle orientation with a 0.230" (5.84mm) mating pin length and 0.220" (5.58mm) solder post length. The 0.095" (2.41mm) insulation height keeps the header low-profile above the board. All 36 positions are loaded — no skipped pins to work around. Push-pull fastening — no locking ramp or latch.
The 68498-436HLF carries an Active lifecycle status per the manufacturer — full production, no end-of-life notice.
The 68498-436HLF uses a 0.100" (2.54mm) pitch — the standard legacy DIP footprint.
As an unshrouded header, it mates with any standard 0.100" pitch single-row receptacle housing that accepts 36 positions. The mating half must provide its own polarization and pin protection since the header has no shroud.
No — the 68498-436HLF is a through-hole, right-angle termination. The BERGSTIK II series includes SMT variants under different order codes, but this specific part is through-hole only.
Unshrouded — the pins are exposed with no plastic shroud for polarization or pin protection.
Through-hole, right-angle mounting — the pins insert into plated through-holes and the header sits parallel to the board edge.