Skip to main content
68602-272HLF — Amphenol product photo

68602-272HLF Amphenol ICC (FCI) BergStik II Pin Header

MPN68602-272HLF
Active

Amphenol ICC (FCI) BergStik® II, 68602-272HLF, 72-position dual-row unshrouded header, 0.100" (2.54 mm) pitch, through-hole solder termination, male square pins, 3 A per contact, 15.0 µinch gold mating finish, UL94 V-0 black housing.

$4.4200Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

68602-272HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions72
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.150\" (3.81mm)
Overall contact length0.480\" (12.19mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Board Fit and Contact Density

The 68602-272HLF: The -65°C to 130°C operating range and UL94 V-0 housing allow placement in outdoor telecom cabinets or industrial enclosures where temperature cycling and flame rating are required.

Frequently asked questions

What is the mating connector for 68602-272HLF?

Any standard BergStik II 0.100" pitch dual-row receptacle mates with this unshrouded header. The push-pull retention means the receptacle must provide its own locking if vibration resistance is needed.