The contacts are phosphor bronze with a 100.0 µin (2.54 µm) tin plating on the mating surface, rated for 5 A per circuit at 110 V. The black UL94 V-0 housing is unshrouded, meaning the pins are exposed for direct mating with a receptacle or IDC connector, with push-pull fastening and no locking ramp.
The 0.100" (2.54 mm) pitch is the defining dimension for board layout — it matches the standard 0.100" grid for prototyping boards and aligns with the contact spacing of common IDC sockets and shrouded headers. The 110 V working voltage is adequate for low-voltage signal and control circuits but not for mains or high-voltage bus work. The overall contact length of 0.588" (14.94 mm) includes a 0.120" (3.05 mm) mating interface and a 0.368" (9.35 mm) post length — the post length must clear the board thickness plus any through-hole plating.