The Amphenol FCI 68695-108HLF is an 8-position, 2-row unshrouded header from the BERGSTIK II series, on a standard 0.100" (2.54mm) pitch. It is a board-to-board interconnect — male pin, square contact, right-angle orientation for through-hole soldering. Rated 5A per circuit at 110V, with 30.0µin (0.76µm) gold or GXT plating on the mating surface, this header is suited for signal and moderate-power interconnects inside enclosed equipment where the UL94 V-0 housing meets the flame rating requirement.
The 0.100" (2.54mm) pitch is the industry-standard grid — your board footprint matches any standard 0.100" receptacle or shroud. The 5A per circuit rating is for signal-level power; at 110V the limiting factor is creepage across the unshrouded pins, not the contact itself. The 0.090" (2.29mm) solder post length is short; check your board thickness and through-hole diameter before committing the footprint.