Product Introduction
It uses a 0.100" (2.54mm) pitch on both the pin-to-pin and row spacing.
Key Electrical and Mechanical Ratings
The 30.0 µin (0.76 µm) gold or Gold GXT™ plating on the mating surface provides corrosion resistance and supports repeated mating cycles — a practical choice for field-serviceable or test-point interconnects, not a single-mate permanent install.
This part is listed as Obsolete. No official successor order code appears on record. The 46-position count and 0.100" pitch footprint are the critical dimensions for matching an alternative; any replacement must share those two parameters to fit the existing board layout.
The 0.230" (5.84 mm) mating pin length provides a solid wipe before the contact bottoms out. The 0.090" (2.29 mm) solder post length is sized for standard through-hole PCB thicknesses; the right-angle orientation means the pins exit the side of the housing, not the bottom, so the board footprint must account for the pin row offset.