Amphenol FCI 68697-434HLF BergStik II Header, 34 Pos

The Amphenol FCI 68697-434HLF is a 34-position, dual-row unshrouded header from the BergStik II series. It is a board-to-board interconnect, designed for through-hole mounting in a right-angle orientation — the pins sit parallel to the PCB surface, which suits board-edge applications where the mating connector approaches from the side rather than from above. The 0.100" (2.54 mm) pitch on both rows and between rows is a standard footprint that matches legacy BergStik receptacles and many generic 0.100" female headers. All 34 positions are loaded, so the pinout fills the full dual-row grid — there are no skipped or dummy positions. Contacts are phosphor bronze with a 100.0 µ" (2.54 µm) tin plating on the mating surface and tin on the solder tails. The thick tin finish handles moderate mating cycles in a clean environment; for high-cycle or corrosive-duty applications, a gold-plated sibling in the same series would be the better fit. Rated 5 A per circuit at 110 V, this is a signal-level header — think logic-level I/O, control lines, or low-power data buses. The 5 A rating is per contact, with the total current limited by the temperature rise across the full 34-circuit array. The housing is rated UL94 V-0.