The FCI 68705-236HLF is a 36-position, single-row unshrouded male pin header from the BERGSTIK® II series — a workhorse 0.100" (2.54 mm) pitch board-to-board interconnect. The through-hole solder tails and 0.200" (5.08 mm) mating pin length suit it for parallel or perpendicular PCB stacking where a low-profile, non-keyed connection is acceptable. Gold or Gold, GXT™ plating on the mating surface (15.0 µin / 0.38 µm) gives good corrosion resistance for moderate mating cycle counts in controlled environments.
Rated 5 A per contact at 110 V — the 5 A figure is typical for a signal-level header at this pitch; the limiting factor is the single-row density and the unshrouded housing's creepage path.
At 36 positions, this is the full-populated single-row variant of the 68705 base number. The same pitch and contact geometry are shared across the BERGSTIK® II family — the selection decision is purely the position count matching the BOM circuit count.