The Amphenol FCI 68705-402HLF is a 2-position, single-row unshrouded male pin header from the BERGSTIK II series. It uses the standard 0.100" (2.54 mm) pitch — the same spacing as legacy breadboards and perfboards — and terminates through-hole with solder tails. The tin-plated phosphor bronze contacts are rated 5 A per circuit at 110 V, with a 100.0 µin (2.54 µm) tin mating finish that suits moderate-cycle applications where cost per position matters more than gold's cycle life. The unshrouded push-pull design gives you direct access to the pins for wire-wrapping or hand-soldered jumpers, and the UL94 V-0 black housing meets the flammability requirement for equipment inside an enclosure.
Where the 2-position fits
At 2 positions, this is the smallest member of the BERGSTIK II single-row header family. The same 0.100" pitch and 0.200" (5.08 mm) mating pin length carry across the series.
Sourcing and lifecycle
The 68705-402HLF carries an Active lifecycle status from Amphenol FCI — no end-of-life notice, no last-time-buy window to track. No official cross-reference or direct replacement is on record, but the BERGSTIK II series is a standard 2.54 mm header family with broad second-source compatibility at the footprint level.