Amphenol ICC (FCI) BERGSTIK® II unshrouded header, 2 positions, single row, 0.100" (2.54 mm) pitch, through-hole press-fit/solder termination, male square pins, 30 µinch gold mating finish, rated 3 A, UL94 V-0 black PCT housing.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~130°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.100\" (2.54mm) |
| Insulation material | Polycyclohexylenedimethylene Terephthalate (PCT), Glass Filled |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 2 |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.450\" (11.43mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 69190-102HLF: 2 positions loaded all, single row — the narrowest possible header for a two-wire signal or power tap. 30 µinch gold over nickel on the mating face supports several hundred mating cycles without contact resistance drift; in a field-service interconnect cycled quarterly, that is decades of reliable contact.
Buyers need to compare costs and budget for the BOM.
Directly drives the purchase decision and distributor selection.
Engineers must validate fit, footprint, and electrical/mechanical specs before design-in.
Compliance is mandatory for regulatory and environmental requirements in manufacturing.
Sourcing buyers and techs need alternatives when the part is out of stock or obsolete.
Cross-referencing helps brokers and buyers find lower cost or faster-available substitutes.