The 71922-114: Right-angle through-hole termination: the pins exit the board edge parallel to the PCB plane, keeping the cable assembly low-profile above the board surface. The 0.114" (2.90mm) post length suits standard 1.6mm-thick boards. Keying slot and mounting flange add orientation and board retention.
Contact Plating and Mating Reliability
Square male pins with a 0.228" (5.80mm) mating length provide a solid wipe surface for the receptacle's dual-beam contacts. The contact resistance stays below 20 mOhm per circuit at rated current when mated with the matching Quickie IDC or crimp receptacle.
No official successor or direct pin-compatible replacement is recorded from the original manufacturer. The 71922 base product number is discontinued — any remaining stock is through independent distribution channels. Current availability and pricing are not posted; submit an RFQ for your BOM quantity and target delivery window.
Insulation height of 0.339" (8.61mm) above the board — the right-angle body sits low enough to clear adjacent components in a dense layout. Row spacing is also 0.100" (2.54mm), matching the column pitch — the 14-position dual-row layout fits a standard 2x7 footprint. All positions are loaded; no unpopulated slots.