34-Position, 0.100" Pitch, Right-Angle Header — Board Fit and Mating
The 71922-234: Short latch lock/eject hooks on both ends provide a positive mechanical lock against vibration-induced disconnect, while the keying slot prevents mismating with non-keyed counterparts. In a typical industrial panel where the connector is unmated a few times per year, this plating will outlast the equipment's service life.
No direct replacement or successor part number is recorded from Amphenol ICC (FCI). This means the original design is no longer manufactured, and any available units come from surplus or independent distribution inventory. For BOM continuity, the closest pin-compatible alternative would be another 34-position, 0.100" pitch, 2-row, right-angle, shrouded header with latch locks from the same series — but no official cross-reference exists. A board layout review and mating half check are recommended before substituting.
Mates with a 34-position, 2-row, 0.100" pitch IDC receptacle or crimp housing from the Quickie™ family. The latch lock/eject hooks engage matching slots on the receptacle side — confirm the mating half has the corresponding ejector latch feature. Termination is solder through-hole.