The Amphenol ICC BERGSTIK 75160-101-14LF is a 14-position, single-row, unshrouded male pin header on the standard 0.100" (2.54mm) pitch. It's a through-hole solder-terminated board-to-board interconnect, built for applications where you need a straightforward pin header to mate with a receptacle or shunt — think prototyping boards, test fixtures, or internal wiring in industrial controls and telecom gear.
The 5A per-circuit rating at 110V puts this squarely in signal-to-light-power territory — fine for logic-level power, GPIO headers, or driving small relays, but not a main DC rail connector. The 0.100" (2.54mm) pitch is the classic breadboard-compatible spacing, so it drops into a standard perfboard or mates with a wide range of 0.100" pitch receptacles. The -65°C~130°C operating temperature range and UL94 V-0 rated thermoplastic housing mean this header can sit inside an enclosure in an industrial cabinet without derating or flame concerns. The 0.225" (5.72mm) mating pin length and 0.100" (2.54mm) post length give a standard through-hole footprint — the overall contact length of 0.425" (10.80mm) is what you'd expect for a single-row header on a 1.6mm PCB.